View RMG04GT121_3807462.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

general purpose chip resistors ( lead-free for rmg 04/06/10/12 series standard ) document no. trmg-xxrmg001a issued date 2008/12/23 page number 1/11 ta-i technology co., ltd 1. scope : this specification applies for the rmg se ries chip resistors made by ta-i. 2. construction: 3. type designation: rmg 10 j t 103 product code size tolerance packaging nominal rmg : chip resistor power rating resistance 04-0402(1005) - 1/16w 06-0603(1608) - 1/10 w 10-0805(2012) - 1/8 w 12-1206(3216) - 1/4 w j- 5% g- 2% f- 1% g- 0.5% t-paper tape 3 digits, e.g.,: (e-24) 103 = 10k 4 digits, e.g., : ( e-96 ) 1540 = 154 ceramic substrate ni plating conductor sn plating resistive element over coat
general purpose chip resistors ( lead-free for rmg 04/06/10/12 series standard ) document no. trmg-xxrmg001a issued date 2008/12/23 page number 2/11 ta-i technology co., ltd 4. dimensions : unit: mm type l w c d t rmg04 +0.10 1.00 -0.05 0.50 0.05 0.25 0.15 0.30 0.15 0.30 0.05 rmg06 1.50 0.10 0.80 0.10 0.30 0.20 0.40 0.20 0.40 0.10 rmg10 2.00 0.15 1.25 0.15 0.40 0.20 0.60 0.20 0.50 0.10 rmg12 3.10 0.20 1.50 0.20 0.50 0.30 0.70 0.20 0.50 0.10
general purpose chip resistors ( lead-free for rmg 04/06/10/12 series standard ) document no. trmg-xxrmg001a issued date 2008/12/23 page number 3/11 ta-i technology co., ltd 5. ratings & characteristics : type power rating at 70 rating voltage max. working voltage max. over- load voltage t.c.r (ppm/ ) resistance range( ) d( 0.5%),f( 1%) e-96&e-24 g( 2%) e-24 j( 5%) e-24 rmg04 1/16w refer 5.2 50v 100v 100 1 -100k rmg06 1/10w refer 5.2 50v 100v 100 1 -390k rmg10 1/8w refer 5.2 150v 300v 100 1 -800k rmg12 1/4w refer 5.2 200v 400v 100 1 -1m 5.1 derating curve : for resistors operated at ambient temperature over 70 , power rating shall be derated in accordance with figure 1. p max. 100 power ratio ( % ) 50 0 -55 50 70 100 125 155 ambient temp. ( c ) figure 1
general purpose chip resistors ( lead-free for rmg 04/06/10/12 series standard ) document no. trmg-xxrmg001a issued date 2008/12/23 page number 4/11 ta-i technology co., ltd 5.2 rated voltage: the rated voltage is calculated by the following formula: e = p * r e= rated voltage(v) p= rated power(w) r= resistance value ( ) e.g. : what is rmg06jt102 the rated voltage ? rmg06jt102 p:1/10w ; r:102 = 1k = 1000 e = 0.10(w) * 1000( ) = 10.0 (v)
general purpose chip resistors ( lead-free for rmg 04/06/10/12 series standard ) document no. trmg-xxrmg001a issued date 2008/12/23 page number 5/11 ta-i technology co., ltd 6. reliability tests: test items reference standard condition of test test limits( r / r) temperature coefficient of resistance mil-std-202f method 304 ; jis-c5202-5.2 +25 ? +125 100 ppm/ short time overload mil-r-55342d -para. 4.7.5; jis-c5202-5.5 2.5 x rated voltage for 5 sec d/f/g/j : (1% + 0.1 ) remark : 0402 size : d/f/g/j : ( 2% + 0.1 ) high temperature exposure (storage) mil-std-202 method 108 1000 hrs. @ t=125c. unpowered. measurement at 242 hours after test conclusion. d/f /g/j: (2% + 0.1 ) temperature cycling jesd22 method ja-104 1000 cycles (-55c to +125c) measurement at 242 hours after test conclusion. d/f/g/j : (2% + 0.1 ) moisture resistance mil-std-202 method 106 1000 hrs , t=24 hours / cycle . notes : steps 7a& 7b not required. unpowered . d/f/g/j: (2% + 0.1 ) biased humidity mil-std-202 method 103 1000 hours 85c/85%rh. note: specified conditions: 10% of operating power. measurement at 242 hours after test conclusion. d/f/g/j : (3% + 0.1 ) operational life mil-std-202 method 108 1000 hours ta=125c at rated power. measurement at 242 hours after test conclusion. remark : specification of test pcb :by ta-i mounted q?ty : mounted 2 pcs on 1 pcb . d/f : (2% + 0.1 ) g / j : (3% + 0.1 ) resistance to soldering heat mil-std-202 method 210 condition b : immerse the specimens in and eutectic solder at 260 5 for 10 1s . d/f : (0.5% + 0.05 ) g / j : (1% + 0.1 ) solderability j-std-002 245 5 solder, 2 0.5 sec dwell. solder : sn96.5 / ag3.0 / cu0.5 > 95% area covered with tin board flex ( bending ) aec-q200-005 3mm deflection d/f : (0.5% + 0.05 ) g / j : (1% + 0.1 ) terminal strength (smd) aec-q200-006 pressure x kgf a r0.5 pressure rod for 60 sec force : 0402 : 0.5kg 0805 : 1.0kg 0603 : 0.5kg 1206 : 1.8kg d/f : (0.5% + 0.05 ) g / j : (1% + 0.1 )
general purpose chip resistors ( lead-free for rmg 04/06/10/12 series standard ) document no. trmg-xxrmg001a issued date 2008/12/23 page number 6/11 ta-i technology co., ltd 7. marking 7.1 2% & 5%(e24) : rmg06/ rmg10 / rmg12 resistance value is expressed by 3 digits, the first two digits represent the significant figures of nominal resistance value in , and the third digit represents exponent for base of 10. e.g. :, 102 = 10 10 2 = 1000 = 1k 7.2 0.5%, 1% (e96/e24 ) : rmg10 / rmg12 resistance value is expressed by 4 digits or 3digits , the first three digits represent the significant figures of nominal resistance value in , and the fourth digit represents exponent for base of 10. e.g. : 1000 = 100 10 0 = 100 7.3 0.5%, 1% ( e96/e24): rmg06 when the marking space is too small in such small-sized resistors as rm06, the marking can not made by 4 digits and may be made by two digits combined with one english capital. symbol for e96 series nominal resistance value symbol e96 symbol e96 symbol e96 symbol e96 01 100 25 178 49 316 73 562 02 102 26 182 50 324 74 576 03 105 27 187 51 332 75 590 04 107 28 191 52 340 76 604 05 110 29 196 53 348 77 619 06 113 30 200 54 357 78 634 07 115 31 205 55 365 79 649 08 118 32 210 56 374 80 665 09 121 33 215 57 383 81 681 10 124 34 221 58 392 82 698 11 127 35 226 59 402 83 715 12 130 36 232 60 412 84 732 13 133 37 237 61 422 85 750 14 137 38 243 62 432 86 768 15 140 39 249 63 442 87 787 16 143 40 255 64 453 88 806 17 147 41 261 65 464 89 825 18 150 42 267 66 475 90 845 19 154 43 274 67 487 91 866 1000 102
general purpose chip resistors ( lead-free for rmg 04/06/10/12 series standard ) document no. trmg-xxrmg001a issued date 2008/12/23 page number 7/11 ta-i technology co., ltd 20 158 44 280 68 499 92 887 21 162 45 287 69 511 93 909 22 165 46 294 70 523 94 931 23 169 47 301 71 536 95 953 24 174 48 309 72 549 96 976 symbol for multipliers symbol a b c d e f g h x y z multipliers 10 0 10 1 10 2 10 3 10 4 10 5 10 6 10 7 10 -1 10 -2 10 -3 e.g : 01a = 100 10 0 = 100 notes : when the resistance value is not in the list of e96 , 3 digitals with underline in e-24 series is used as mark . e.g. : 0603 , 120 , 1% marking is 121 7.5 no marking for rmg 04 8. taping & reel : 8.1 taping dimensions 8.1.1 4 mm pitch paper: packing type a b w f e p 1 p 2 p 0 d 0 t paper rmg06 1.1 0.1 1.9 0.1 8.0 0.2 3.5 0.05 1.75 0.1 4.0 0.1 2.0 0.05 4.0 0.1 +0.1 1.5 -0 0.64 0.1 rmg10 1.6 0.15 2.4 0.2 0.84 0.1 rmg12 2.0 0.15 3.6 0.2 121 01a
general purpose chip resistors ( lead-free for rmg 04/06/10/12 series standard ) document no. trmg-xxrmg001a issued date 2008/12/23 page number 8/11 ta-i technology co., ltd 8.1.2 2 mm pitch paper : packing type a b w f e p 1 p 2 p 0 d 0 t paper rmg04 0.7 0.05 1.2 0.05 8.0 0.2 3.5 0.05 1.75 0.1 2.0 0.1 2.0 0.1 4.0 0.1 +0.1 1.5 -0 0.45 0.1 rmg06 1.1 0.1 1.9 0.1 2.0 0.1 2.0 0.1 0.64 0.1 package type size paper tape 4 mm pitch 2 mm pitch 178mm/r 178mm/r rmg 04 10000 rmg 06 5000 10000 rmg 10 5000 rmg 12 5000
general purpose chip resistors ( lead-free for rmg 04/06/10/12 series standard ) document no. trmg-xxrmg001a issued date 2008/12/23 page number 9/11 ta-i technology co., ltd 8.2 reel specifications: unit: mm type a b c w t rmg 04 / 06 rmg10 /12 178.0 2.0 60.0 1.0 13.0 1.0 9.0 1.0 11.5 1.0 8.3. peel ?off force : peel ?off force of paper and blister tape is in accordance with ?jis-c5202 ? that is , 0.1 to 0.7 n at a peel-off speed of 300 mm / minute. pull top cover tape 300 mm/min 10 ? 15 standard: 0.1 ~ 0.7 n carrier tape
general purpose chip resistors ( lead-free for rmg 04/06/10/12 series standard ) document no. trmg-xxrmg001a issued date 2008/12/23 page number 10/11 ta-i technology co., ltd 9. label : 9.1 manufacture label : date code resistance tolerance type lot no: 9.2 customer label ( by customer request ): lead-free products product spec. customer no: date year month 10. recommended land patterns : land pattern type size dimension ( mm ) a b c rmg 04 (0402 ) 0.50~0.6 2.0 0.5 rmg 06 (0603 ) 0.7~0.9 3.2 1.2 rmg 10 (0805 ) 1.0~1.4 4.0 1.65 rmg 12 (1206 ) 2.0~2.4 5.5 2.0 qty: 5000 pcs 102 j 00860166k- 0008 0603 ta-i tech lead free 0603 5%(t) 1k 105a702723 rmg06jt102 04.05.21
general purpose chip resistors ( lead-free for rmg 04/06/10/12 series standard ) document no. trmg-xxrmg001a issued date 2008/12/23 page number 11/11 ta-i technology co., ltd 11. recommend ir ? reflow profile : (solder : sn96.5 / ag3 / cu0.5) peak : 250 0 5 ? + , 5 sec pre ? heat zone : 150 to 180 , 90 30 sec soldering zone : 230 or higher , 30 10 sec 12. storage conditions: temperature: 5 ~35 ,humidity:40%~75% 13. shelf life: 2 years from manufacturing date.

▲Up To Search▲

Price & Availability of RMG04GT121

	To Download RMG04GT121 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .